Aerospace and car manufacturers need lighter vehicles to cut CO₂, but today’s aluminium and magnesium alloys cannot be shaped cheaply enough, joined reliably to composites or steel, or protected from corrosion in multi-material structures. This programme tackles those bottlenecks. Current light-alloy vehicles already save roughly 40% in weight compared with steel, and the sector expects demand for these materials to double within a decade. But first-generation alloys have hit their limits: they cannot form the complex shapes future aircraft and cars require, and joining them to other materials creates weak, corrosion-prone interfaces. The research will develop computer models that predict how a metal’s internal microstructure affects its formability, so engineers can optimise forming processes without trial-and-error. It will also explore laser-patterning to create more formable microstructures only where needed, and self-healing coatings that protect dissimilar joints in service. If successful, manufacturers could produce lighter, cheaper, recyclable vehicles and aircraft without switching to expensive polymer composites. The programme also aims to train the metallurgists and corrosion scientists that UK manufacturing urgently needs—a skills gap identified by EPSRC’s own review.
View original technical description
To avoid global warming and our unsustainable dependence on fossil fuels, the UK's CO2 emissions are recommended to be reduced by 80% from current levels by 2050. Aerospace and automotive manufacturing are critical to the UK economy, with a turnover of 30 billion and employing some 600,000 worker. Applications for light alloys within the transport sector are projected to double in the next decade. However, the properties and cost of current light alloy materials, and the associated manufacturing processes, are already inhibiting progress. Polymer composites are too expensive for body structures in large volume vehicle production and difficult to recycle. First generation, with a high level of recycling, full light alloy aluminium and magnesium vehicles in production are cheaper and give similar weight savings (~ 40%) and life cycle CO2 footprint to low cost composites. Computer-based design tools are also playing an increasing role in industry and allow, as never before, the optimisation of complex component architectures for increased mass efficiency. High performance alloys are still dominant in aeroengine applications and will provide ~ 30% of the structural components of future aircraft designs, where they will have to be increasingly produced in more intricate component shapes and interfaced with composite materials.To achieve further weight reductions, a second generation of higher performance light alloy design solutions are thus required that perform reliably in service, are recyclable, and have more complex product forms - produced with lower cost, energy efficient, manufacturing processes. With design optimisation, and by combining the best attributes of advanced high strength Al and Mg alloys with composites, laminates, and cheaper steel products, it will be possible to produce step change in performance with cost-effective, highly mass efficient, multi-material structures.This roadmap presents many challenges to the materials community, with research urgently required address the science necessary to solve the following critical issues: How do we make more complex shapes in higher performance lower formability materials, while achieving the required internal microstructure, texture, surface finish and, hence, service and cosmetic properties, and with lower energy requirements? How do we join different materials, such as aluminium and magnesium, with composites, laminates, and steel to produce hybrid materials and more mass efficient cost-effective designs? How do we protect such multi-material structures, and their interfaces against corrosion and environmental degradation?Examples of the many scientific challenges that require immediate attention include, how can we: (i) capture the influence of a materials deformation mechanisms, microstructure and texture on formability, thus allowing computer models to be used to rapidly optimise forming for difficult alloys in terms of component shape and energy requirements; (ii) predict and control detrimental interfacial reactions in dissimilar joints; (iii) take advantage of innovative ideas, like using lasers to 'draw on' more formable microstructures in panels, where it is needed; (v) use smart self healing coating technologies to protect new alloys and dissimilar joints in service, (vi) mitigate against the impact of contamination from recycling on growth of oxide barrier coating, etc.A high priority for the Programme is to help fill the skills gap in metallurgical and corrosion science, highlighted in the EPSRC Review of Materials Research (IMR2008), by training the globally competitive, multidisciplinary, and innovative materials engineers needed by UK manufacturing. The impact of the project will be enhanced by a professionally managed, strategic, research Programme and through promoting a high international profile of the research output, as well as by performing an advocacy role for materials engineering to the general public.
Plain English summaries and category classifications on this site are generated by AI and may not perfectly reflect the original research.
Is something wrong? Let us know